gas and diesel generators

NEW 520kW MAN Natural Gas industrial Gensets HTG-520GF
Total 24638


520kW MAN Natural Gas industrial Gensets   HTG-520GF

ID: 1532
Units Available:   3
Year of Manufacture:   2024
Category: Natural Gas Genset
International Certifications: EU, China, USA
The price: P.O.A.

NEW 520kW MAN Natural Gas industrial Gensets & CHPs (50Hz Applications) HTG-520GF

COP (kW) 520
Engine Model MAN E3262LE202
Bore*Stroke (mm) 132*157
DSPL. (L) 25.8
Dry Weight (kg) 7500

HAITAI MAN series gas industrial gensets & CHPs are driven by MAN engines originally made in Germany, one of the world top engine brands all over the world.
This series generator sets choose high quality natural gas engine assembled with alternators
(Stamford, Faraday or other famous brand), the control system adopts PLC automatic controller.

Advantages of LNG CNG Natural Methane Gas Generator Set
High efficiency and Cost effective
Low Emissions due to advantage technologies
Low space requirement due to compact design
Reliable service life resulting from application-specific design
Powerful to ensure uninterrupted operation
Adapt to harsh conditions
Applications of LNG CNG Natural Methane Gas Generator Set

Fuel Types CNG, LNG, PNG
Oilfield Associated Gas,
Coalmine Gas, Coalbed Gas, methane gas.

Control Panel
The DSE7310 is an Auto Start Control Module and the DSE7320 is an Auto
Mains (Utility) Failure Control Module suitable for a wide variety of single,
diesel or gas,gen-set applications

OPTIONS
General Container The internal space is divided into two spaces: engine room and control room, and inspection channels on both sides of the equipment inside the engine room.

Functional description:
1) The container is equipped with a distribution box to provide power to all low-voltage loads in the engine room, such as horizontal radiator fans, control screens, lighting, exhaust (supply) fans (for horizontal distribution), chargers, electric heating (optional), oil pumps, electric heating (optional), and outdoor searchlights. It can also be responsible for controlling related equipment (according to project configuration requirements);
2) Two track suspension beams and a hoist are installed on the top of the engine room, with a lifting capacity of 0.5 tons per beam;
3) Inlet of engine air filter and the engine room are equipped with electric heating devices to avoid freezing and blockage (optional);
4) The floor of the machine room is equipped with an axial drive mechanism for the generator, which enables the generator to detach from the coupling by 200mm. (Optional)
5) If the indoor heating temperature in the machine room is not lower than 5 C deg., an insulation layer needs to be installed under the chassis of the machine room, and electric heating heaters (optional) are used inside the machine room;
6) One explosion-proof acoustic and visual alarm lamp is installed outside each machine room. The lighting inside the machine room is an explosion-proof LED lamp with emergency function. Other equipment and boxes do not need to be explosion-proof (optional).
7) Ladder: Install a simple ladder at a suitable position on the box;
8) Configure the fire protection system in the machine room: Install dry powder fire extinguishers as fire extinguishing devices (standard), and other flame detectors, methane leak detectors, smoke detectors, etc. as optional options;
9) Note: The specific configuration shall be subject to the actual situation of the project.

CHP system (Exhaust Heat Collector) CHP/ Cogeneration/ CCHP/ Trigeneration
1. The unique spiral winding structure increases the turbulence effect, and the heat exchange capacity per unit area is 3-7 times that of the traditional heat exchanger.
2. High heat transfer coefficient, high heat exchanger heat transfer efficiency, good heat transfer effect, high heat transfer coefficient up to 14000W/m·k, energy saving effect is remarkable.
3. Small size. With only one-tenth of the traditional tube and shell heat exchangers, it takes up less space and reduces infrastructure and installation and maintenance costs.
4. Using a small clearance design to increase the flow rate, the heat exchanger is not easy to foul, and the use and maintenance costs
are low.
5. Advanced design concept, the length of the heat exchange tube is 3-4 times the height of the cylinder, the material stays longer and the
heat transfer is more fully.
6. Spiral-wound elastic tube bundle design can effectively eliminate pipe vibration and stress due to thermal expansion and contraction deformation.
7. Unique 90 degree connection, heat exchangers all participate in heat exchange, no dead ends and stagnant areas, reduce fluid resistance.
8. Counter-current heat transfer, asymmetric flow design, in the vapor-liquid heat transfer field has other advantages that can not be compared with heat exchangers.

Automatic Paralleling and Gridconnect Control System
This system can connect generator sets in parallel or connect the generator set to the grid automatically.
Remote Control
Horizontal radiator
Oil and Water Heater
High Voltage Alternator 6.3kv and 10.5kv, High Voltage Electrical Control Cells (PT Cabinet)
CT Cabinet
High Voltage outgoing cabinet
DC Panel, Groud Resistance Cabinet and low voltage distribution cabinet etc)


Documentation:
engine and generator original technical data / controller operation manual /instruction and maintenance manual / test report / delivery list



The specification of the 520kW MAN Natural Gas industrial Gensets HTG-520GF

COP (kW) 520
Engine Model MAN E3262LE202
Bore*Stroke (mm) 132*157
DSPL. (L) 25.8
Rotation Speed (RPM) 1500
Overall dimension (LxWxH)(mm) 5500*2000*2100
Dry Weight (kg) 7500
Rated Frequency 50Hz/60Hz
Type Open/Silent/Soundproof/Container
Alternator Type Brushless Brand Stamford, Leroy-Somer, Faraday, Lingyu, etc.
Connection 3-pahse, 4-wire
Controller Type Auto PLC Controller Brand Deepsea, SmartGen, Com Ap etc.
Fuel Natural Gas 0.3m 3/kw-h
Remarks:
* Both 50Hz and 60Hz are available.
* Special voltages available.
* Alternator brand Stamford,Leroy Somer,Marathon are optional.
* Controller brand Deepsea,Comap are optional.
* Special requirements for Soundproof Canopy, ATS, Parallel & Synchronization Control, CHP and Biogas Pre-treatment Machinery are optional
* The data herein can vary depending on individual production


Warranty terms service
1 year warranty
520kW MAN Natural Gas industrial Gensets   HTG-520GF  for sale 520kW MAN Natural Gas industrial Gensets   HTG-520GF  for sale 520kW MAN Natural Gas industrial Gensets   HTG-520GF for sale 520kW MAN Natural Gas industrial Gensets   HTG-520GF | NEW military vehicles, MOD surplus for sale 520kW MAN Natural Gas industrial Gensets   HTG-520GF | NEW military vehicles, MOD surplus for sale 520kW MAN Natural Gas industrial Gensets   HTG-520GF | NEW military vehicles, MOD surplus for sale


SPARE PARTS + We provide a 12-month Warranty and full stock of spare parts.

SHIPPING SHIPPING We can arrange shipping from our yard to your door worldwide.
- We deliver to over 150 countries


toprest.com ©

Materials and specifications are subject to change without notice.
Featured machines in photos may include additional equipment. The specification do not necessarily show the standard version of the machine.
Ask our manager for available options.
09.00 - 17.00 hrs Monday - Friday
Not available on Saturday's or Sunday's

NEW MACHINERY

Article printed at 2024-03-29. Please see https://gas.toprest.com/equip.php?ID=1532 for the latest version.