NEW 1100kw Baudouin Natural Gas HTG-1100GF GenSet for sale
Best price on the market > Fast shipping > commissioning > staff training > Lifetime service
ID/REF: 2795
Manufactured by: Baudouin
The factory: Baudouin
Category: Natural Gas Genset | Gas Propane LPG Genset
International Certifications: EU, China, USA
Popularity: 71394 view
Manufactured by: Baudouin
The factory: Baudouin
Category: Natural Gas Genset | Gas Propane LPG Genset
International Certifications: EU, China, USA
Popularity: 71394 view
NEW
Mileage Hrs/Kms: 0
Year of Manufacture: 2024
The price: P.O.A.
QTY Available in stock: 2
Year of Manufacture: 2024
The price: P.O.A.
QTY Available in stock: 2
WE offer: industrial biomass gasifier~ biomass gasification system 1MW French Baudouin 1100kW Natural Gas HTG-1100GF GenSet, NEW Cummins LNG CNG Natural Methane Gas Generator Set 1100kw, Cummins natural gas generator sets, NEW Baudouin generator sets, 1MW NEW Baudouin gas generator sets, Baudouin 1100kW biomass gas generator sets, Baudouin 1100kW containerized gas generator sets, Dual fuel diesel&gas generator sets,hydrogen gas generator sets CHP unit, lpg generator price lpg powered generator super silent lpg generator, lpg generators for sale electric generator, lpg genset, lpg gas generator price, NEW Baudouin lpg generator 1100kva, Baudouin 1MW containerized gas generator sets,.
cost industrial 1100kw Baudouin Natural Gas HTG-1100GF GenSet. Cost Spare parts for 1100kw Baudouin Natural Gas HTG-1100GF GenSet. Download Manuals PDF for 1100kw Baudouin Natural Gas HTG-1100GF GenSet. Manuals for 1100kw Baudouin Natural Gas HTG-1100GF GenSet
Maintenance 1100kw Baudouin Natural Gas HTG-1100GF GenSet for sale USA, UK, France, Africa, Ukraine, Russia, Marocco, Indonesia, Australia, Italy, France and standby 1100kw Baudouin Natural Gas HTG-1100GF GenSet
NOTICE
Please don't copy or download any of these photos for posting on the Internet or for promotional use. Please send us a personal message if you would like to use them.
Please don't copy or download any of these photos for posting on the Internet or for promotional use. Please send us a personal message if you would like to use them.
The data sheet of the NEW 1100kw Baudouin Natural Gas HTG-1100GF GenSet
NEW 1100kW Baudouin LNG CNG Natural Methane Gas HTG-1100GF Generator SetAll French Baudouin engines are built with the best technology and components.
The engines are ISO 9001: 2008 certified; which demonstrates its commitment to quality under European standards.
Prime Power kVA/kW 1370/1100
Rated speed r/min 1500
Engine Gas Model 16M33D1280NG10
Bore x Stroke (mm) 150x185
Alternator Faraday FD7A
Gas pressure MPa: 0.05-0.1
Power factor: 0.8
Operating voltage V.: 400
Electrical efficiency %: 40.2
Thermal efficiency% vg : 35
Energy efficiency: 0.2583 m3/kw
Fuel consumption at 100% load, 341.01 nm3/h
Fuel consumption at 80% load, 272.81 nm3/h
Fuel Types CNG, LNG, PNG, Oilfield Associated Gas, Coalmine Gas, Coalbed Gas, methane gas.
This series of natural gas generator can be used in natural gas power plant, school, hospital, oil field and others, as a 24-hour uninterrupted power or standby power.
Advantages of 1100kW Baudouin LNG CNG Natural Methane Gas Generator Set
1) Low operating and maintenance costs
2) Longer machine life: Special design engine has longer life with overhaul time 20000hours.
3) Low Emissions due to advantage technologies
4) Easy operation: The HAITAI Gas Power Generator is easy to operate.
5) The HAITAI Gas Power Generator use most advanced lean burn technical for high efficiency
6) Powerful to ensure uninterrupted operation
7) Adapt to harsh conditions
8) Main parts like ECU, Gas Mixer, Pressure Regulator, etc are origin made in USA& Italy.
Economy
Fuel consumption for the load rate between 60% and 90% is optimized specially, such that low fuel consumption is guaranteed.
Environmental adaptability
Low temperature adaptability: The engine can start directly at -10? without auxiliary measures and smoothly at -30? by means of intake preheating.
High level of platform
The engine is modular in design with high level of platform, the maintenance parts of the whole series are universal.
1100kW Baudouin KEY BENEFITS
Ensures the display continues to operate
in extreme cold weather conditions.
Provides true generator and mains (utility)
sensing.
Provides clear accurate power
measurement information.
Provides secure and simple off site
monitoring. All ports are continuously active.
Provides multiple installation options.
Makes the module ideal for standard and
electronic engine applications.
Tracks the amount of fuel being used and
sounds an alarm if over/under fuel use is
detected.
Ensures the control module can be used
with the latest in modern electronic engine technology.
Ensures the load can be transferred
manually/automatically between mains (utility) and generator power.
Ensures the control module is suitable for worldwide use.
1100kW Baudouin ADDITIONAL FEATURES
Customisable status screens.
Multiple date & time scheduler.
Charge alternator failure alarm.
CAN engine manual speed control.
Manual fuel pump control.
Engine exerciser.kW & kV Ar overload protection.
Reverse power (kW & kV Ar) protection. Unbalanced load protection.
USB connectivity.
Backed-up real time clock.
Configurable Gencomm pages.
SMS messaging start & stop functionality.
Modem diagnostic display screens.
Remote display support (max 3 units)
PowerKit Gas Engine Datasheet
Ratings Definitions - COP
- Unlimited using time per year;
- Continuous power is the maximum power available at a constant load factor;
- No overload capability is allowed
Ratings Definitions - PRP
- Unlimited using time per year;
- The average load rate is no more than 70% over 24 hours;
- Overloading 10% for 1h within 12 hours of operation is allowed.
Ratings Definitions - ESP
- he annual operating time shall not exceed 200h;
- The average load rate shall not exceed 70% over 24h operation cycle;
- No overload capability is allowed;
- The acceleration of starting of engines are carried out in accordance with
Q/WCG136.13, and theres no engine process. From acceleration of starting to calibration speed shall be completed within 10s. Natural aspirated engine,
when the environment temperature is below 5deg., need to increase preheat facilities to ensure that engine water temperature above 30deg..
When environment temperature over 5 deg., no preheating facilities are required.
Supercharged engine, when the environment temperature is below 10deg., need to increase preheat facilities to ensure that engine water temperature
above 30deg. When environment temperature over 10 deg., no preheating facilities are required
LTP- No ability to overload;
- The annual operating time shall not exceed 500h while supplying a variable
electrical load.
DCP- It has 10% overload capacity;
- Annual run time is unlimited;
- Working under variable or continuous load of less than 100%;
- The power load shall not exceed 70% of the calibration power when the device is running continuously.
Descriptions- ISO 8528-1, ISO 3046, DIN6271+-5%
- All ratings are based on operating conditions under ISO 8528-1,ISO 3046, DIN6271. Performance tolerance of+-5%.
- Test conditions : 100 kPa, 25ºC air inlet temperature, relative humidity of
30%. Derating may be required for conditions outside these;
please contact the factory for details. - Power output curves are based on the engine operating with gas system, water pump and lubricating oil pump, without battery charging alternator,
fan and optional equipment
OPTIONS
Automatic Paralleling and Gridconnect Control System
This system can connect generator sets in parallel or connect the generator set to the grid automatically.
CHP/Cogeneration/CCHP/Trigeneration
Remote Control
Horizontal radiator
Oil and Water Heater
High Voltage Alternator 6.3kv and 10.5kv, High Voltage Electrical Control Cells (PT Cabinet
CT Cabinet
High Voltage outgoing cabinet
DC Panel, Groud Resistance Cabinet and low voltage distribution cabinet etc)
Remarks:
Both 50Hz and 60Hz are available.
> Special voltages available.
Alternator brand Stamford,Leroy Somer,Marathon are optional.
Controller brand Deepsea, Comap are optional.
Special requirements for Soundproof Canopy, ATS, Parallel & Synchronization Control, CHP and Biogas Pre-treatment Machinery are optional
The data herein can vary depending on individual production
Sea-Level<1000m , Temp<40
For over 100 years, Baudouin has designed and manufactured the highest quality diesel and gas engines for marine and power generation applications spanning 18C 4125 kVA. Our Network supports our customers in over 130 countries with specification, commissioning, service and genuine spare parts.
Global Headquarters: Cassis, France
Baudouin China At a Glance Location: Weifang, China
The specification of the 1100kw Baudouin Natural Gas HTG-1100GF GenSet
Model HTG-1100GF
Prime Power kVA/kW 1370/1100
Rated speed r/min 1500
Engine Gas Model 16M33D1280NG10
Bore x Stroke (mm) 150x185
Alternator Faraday FD7A
DsHT 52.5
Displacement (L) 52.3
N° of Cylinders 16
Cylinders Arrangement At Vee
Fuel System Open Chamber / Lean Burn
Governor (Gov.) ECU
Controller Smargen/ Deepsea HGM6110 /DSE7320
Aspiration (Asp.) Turbocharged & air-to-water cooled
Low emission standard, lean burn technology resulting in lower NOx emissions
High transient and block load capabilities
Full duty cycle capability, from prime to continuous power
Electronically controlled high efficiency engines
Lubrication system
Full flow screwable oil filters
Lube oil purifier with replaceable cartridge
Water cooled lube oil cooler
Continuous Power (COP)
Continuous Power is the maximum power available for an unlimited period of use at a constant load factor. No overload
capability is allowed.
Unlimited Prime Rated Power (PRP)
Prime Power is the maximum power available for unlimited hours of usage in a variable load application. The average load factor should not exceed 70% of the engine's PRP power rating during any 24 hour period. An overload capability of 10% is available, however, this is limited to 1 hour within every 12 hour period.
1) All ratings are based on operating conditions under ISO 8528-1, ISO 3046, DIN6271. Performance tolerance of +-5%.
2) Test conditions: 100 kPa, 25 deg.C air inlet temperature, relative humidity of 30%, with fuel density 0.84 kg/L. Derating may
be required for conditions outside these; please contact the factory for details.
3) Power output curves are based on the engine operating with fuel system, water pump and lubricating oil pump; not included are battery charging alternator, fan and optional equipment.
Gas pressure MPa: 0.05-0.1
Power factor: 0.8 Operating voltage V.: 400
Electrical efficiency %: 40.2
Thermal efficiency% vg : 35
Energy efficiency: 0.2583 m3/kw
Fuel consumption at 100% load, 341.01 nm3/h
Fuel consumption at 80% load, 272.81 nm3/h
Starting method 24V Electric
Rated Voltage 400V/230V
Rated Frequency 50Hz/60Hz
Type Open/Silent/Soundproof/Container
Alternator Type Brushless
Brand Stamford, Leroy-Somer, Faraday, Lingyu, etc.
Connection 3-phase, 4-wire
Controller Type Auto PLC Controller
Brand Deepsea, SmartGen, ComAp etc.
Oil consumption per carbon monoxide, 0.3 g/kWh
Dimensions LxWxH mm: 12190x2430x2700
Weight kg.: 26216
strong>Prime Power (PRP): Prime power is available for an unlimited number of annual hours in variable load application, in accordance with GB/T2820 -97 (eqv ISO8528);
A 10% overload capability is available for a period of 1 hour within a 12-hour period of operation.
Standby Power Rating (ESP): The standby power rating is applicable for supplying emergency power for the duration of a utility power interruption. No overload, utility parallel or negotiated outage operation capability is available at this rating.
Rated Voltage: generally the rated power includes 380/220V, 400/230V, 415/240V, 440/254V, we make it according to client's requirements.
Control Panel
The DSE7310 is an Auto Start Control Module and the DSE7320 is an Auto
Mains (Utility) Failure Control Module suitable for a wide variety of single.
Attachment (Optional Parts)
40ft Container canopy
Scientific and efficient Special sand-proof waterproof blinds with illumination.
Soundproof Canopy
(Super Silent canopy)Containerized Canopy
CHP system (Exhaust Heat Collector)
1. The unique spiral winding structure increases the turbulence effect, and the heat exchange capacity per unit area is 3-7 times that of the traditional heat exchanger.
2. High heat transfer coefficient, high heat exchanger heat transfer efficiency, good heat transfer effect, high heat transfer coefficient up to 14000W/m·k, energy saving effect is remarkable.
3. Small size. With only one-tenth of the traditional tube and shell heat exchangers, it takes up less space and reduces infrastructure and installation and maintenance costs.
4. Using a small clearance design to increase the flow rate, the heat exchanger is not easy to foul, and the use and maintenance costs are low.
5. Advanced design concept, the length of the heat exchange tube is 3-4 times the height of the cylinder, the material stays longer and the
heat transfer is more fully.
6. Spiral-wound elastic tube bundle design can effectively eliminate pipe vibration and stress due to thermal expansion and contraction deformation.
7. Unique 90 degree connection, heat exchangers all participate in heat exchange,
no dead ends and stagnant areas, reduce fluid resistance.
8. Counter-current heat transfer, asymmetric flow design, in the vapor-liquid heat transfer field has other advantages that can not be compared with heat exchangers.
- No ability to overload;